Image 1 of 2
Image 2 of 2
Three specially designed contact areas machined on top of the cartridge body provide the exact mechanical coupling that is required by the Sabre cartridge to the tonearm. In addition, there is a ridge machined on the top front of the Sabre to assist with the alignment of the cartridge when mounting onto any Vertere tonearm. Sabre utilizes an Alnico magnet providing long-term stable magnetism and strong magnetic field to size ratio.
Each Sabre‘s cantilever/suspension is individually positioned and aligned at Vertere to ensure maximum musical performance. The Elliptical diamond stylus tip is rigidly fixed and bonded to an aluminium tube cantilever designed for maximum tracking ability without compromising on high frequency response or low surface noise. Sabre has an extended response of below 15Hz to over 25kHz which when coupled with its low mass moving magnet and an output of 4.0mV creates a lifelike dynamic range and scale with incredible detail, low frequency ‘punch’, depth and precision.
Product Specifications
Frequency Response: 15 Hz -25 kHz
Channel Separation: Minimum 22 dB
Output Level: 4.0mV (1kHz, 5cm/sec.)
Recommended Phono Input load: 47 kΩ, 100 pF – 220 pF
Recommended Tracking Weight: 2.0 g (1.9 g – 2.1 g)
Frequency response: 15 Hz -25 kHz
Channel separation: Minimum 22 dB
Cantilever: Aluminium Alloy Tube
Stylus: Elliptical Diamond, 7.5 x 15.5 μm
Mounting: Special Tri-Point contact with M2.5 Threaded Fixing Holes
Generator Fixing: Special Quad-Point Contact with M2.5 Stainless ‘Spike’ Screws
Dynamic Compliance: 10 x 10-⁶ cm/dyne
Coil Resistance: 1 kΩ (per Channel)
Recommended Load Capacitance: 100 – 200pF
Weight: 10.3 g
Dimensions: 17.3 (H) x 17.0 (W) x 28.2 (L) mm
