Image 1 of 1
This DSP model adds a DSP board, enabling all three channels to provide the necessary digital active crossover, delay, gain, and digital EQ profiles, in addition to a Dante Digital Audio Input, and FIR Filters, for the ultimate in sound and loudspeaker setup and EQ. The high efficiency of the SA-series design also means that the amplifiers can be placed in close proximity to each other, as in an equipment rack, without undue overheating.
Product Specifications
Rated Power Output Per Channel: 500 w/ch continuous RMS power @ 4 ohms above power ratings from 20 Hz–20 kHz at <0.5% THD
Peak Output Current: > 30 amps
Voltage Gain: 31 dB
Signal to Noise Ratio (Main Outputs): –103 dB (ref 1V rms, A-wtd.)
Input Impedance: 25k ohms (balanced)
Output Impedance: Less than 0.05 ohms from 20–20,000 Hz
Input Sensitivity: 1.2V for full output
Polarity: Non-inverting, Pin 2 positive
Thermal Load: 7 BTU/minute or less
Power Consumption: See “Wisdom Electronics – Current Draw & BTU Info” in the Resources Section below
Main Voltage Ranges: 100V, 120V, or 230/240V determined by the needs of country for which the unit was manufactured; cannot be reset by dealer or user
Shipping Weight: 40 lbs. (19 kg)
Dimensions – HxWxD: 3.5” x 17” x 13.63” (8.89cm x 43.2cm x 34.7cm)